Filter
Top Products
21
ENGLISH
ENGLISH
SLEEP TIMER:
SLEEP timer function is available during the
multiroom is active, set the time with or
cursor buttons.
MULTI (MULTI ROOM):
To switch on the Multi-room output ON or OFF,
press or cursor button.
VOL (VOLUME SETUP):
Select whether the Multi-room output level is
variable or fixed with a or cursor buttons.
LEVEL (VOLUME LEVEL):
Adjust the Multi-room output level with or
cursor buttons.
MSPKR (MULTI SPEAKER):
To switch on the Multi-speaker output ON or
OFF, press or cursor buttons.
Note:
•
This setting can be changed when the Surr Back is
set “None” in 2-1 SPEAKER SIZE menu. When
this setting is unavailable, “
✽✽✽
” is displayed
VOL (VOLUME SETUP):
Select whether the Multi-speaker output level is
variable or fixed with a or cursor buttons.
Note:
•
This setting can be changed when the Surr Back is
set “None” in 2-1 SPEAKER SIZE menu. When
this setting is unavailable, “
✽✽✽
” is displayed
LEVEL (VOLUME LEVEL):
Adjust the Multi-speaker output level with or
cursor button.
Note:
•
This setting can be changed when the Surr Back is
set “None” in 2-1 SPEAKER SIZE menu. When
this setting is unavailable, “
✽✽✽
” is displayed
MAIN ROOM STATUS:
Selected input source in the main room will be
displayed.
Note:
• If “VOLUME” is set to “FIXED”, the multi-room
output level cannot be adjusted from the second
zone.
After you complete this portion of the set up
, move
the cursor to “MAIN” with or cursor buttons and
press OK button.
8 7.1 CH INPUT LEVEL
This sub-menu is to adjust the speaker levels for
7.1-channel input sources.
Here you will adjust the volume for each channel so
that they are all heard by the listener at the same
level.
1.
Select “7.1CH INPUT” in the SETUP MAIN
MENU with the or cursor buttons, and
press the OK button.
2.
To select “VIDEO IN”, press or cursor
button.
3.
Using the or cursor buttons, select the
video input source which is emitted from
Monitor out in the 7.1 CH INPUT function.
The input source is switched by pressing the
or cursor buttons as follows;
LAST ↔ TV ↔ DVD ↔ VCR1 ↔ DSS ↔
AUX1 ↔ V-OFF ↔ LAST ↔
Notes:
•
When select LAST, the source is set previous
source before 7.1 CH INPUT function
is activated.
•
When select V-OFF, no signal is emitted from
monitor out terminal.
4.
To Select desired channel , press the or
cursor buttons.
5.
Using the or cursor buttons, adjust the
volume level of each channel.
6.
After you complete this portion of the set up,
move the cursor to “MAIN” with the
or
cursor buttons and press the OK button.
Note:
•
These settings will be memorized to 7.1CH INPUT
source.
87.1CHINPUTLEVEL
VIDEO IN : LAST
FRONT L : 0 dB
CENTER : 0 dB
FRONT R : 0 dB
SURR .R : 0 dB
SURR .B R : 0 dB
SURR .B L : 0 dB
SURR . L : 0 dB
SUB W : 0 dB
MA I N EX I T
9 DC TRIGGER SETUP
SR7400 has a DC trigger control jack, this is
selectable to link with input functions for the main
room or multi room.
1.
Select “DC-TRIG SETUP” in the SETUP
MAIN MENU with or cursor button, and
press the OK button.
2.
You can select MAIN ROOM, MULTI ROOM,
REMOTE or DISABLE by pressing or
cursor buttons.
Note:
•
REMOTE is available for the external control. The
RC1400 cannot operate this function
3.
To select desired input source , press or
cursor button.
4.
To set ON or OFF, press or cursor button.
5.
After you complete this portion of the set up,
move the cursor to “MAIN” with the or
cursor buttons and press the OK button.
9DC-TRIGGERSETUP
DC TRIG : DI SABLE
CD :
✽✽✽ TV : ✽✽✽
TAPE : ✽✽✽ DVD : ✽✽✽
CD-R : ✽✽✽ VCR1 : ✽✽✽
TUNER: ✽✽✽ DSS : ✽✽✽
AUX1 : ✽✽✽ 7.1CH: ✽✽✽
AUX2 : ✽✽✽
MA I N EX I T
03.10.13, 9:25 AMPage 21