Filter
Top Products
5
ENGLISH
FRONT PANEL
u TUNING (Down) / (Up) buttons
Press these buttons to change the frequency or the preset number.
These buttons can change setup parameter to each content in OSD
menu system. (See page 35)
i F/P (Frequency / Preset) button
During reception of AM or FM, you can change the function of the UP/
DOWN buttons for scanning frequencies or selecting preset stations
by pressing these buttons. (See page 35)
o MODE button
Press this button to select the auto stereo mode or mono mode when
the FM band is selected.
The “AUTO” indicator lights in the auto stereo mode. (See page 35)
!0 MUTE button
Press this button to mute the output to the speakers. Press it again to
return to the previous volume level.
!1 VOLUME control knob
Adjusts the overall sound level. Turning the control clockwise
increases the sound level.
!2 ATT (Attenuate) button
If the selected analog audio input signal is greater than the capable
level of internal processing, PEAK indicator will light. If this happens,
you should press the ATT button. “ATT” is displayed when this
function is activated.
The signal-input level is reduced by about the half. Attenuation will not
work with the output signal of “REC OUT” (TAPE, CD-R/MD, VCR1
and VCR2 output). This function is memorized for each input function.
AV SURROUND RECEIVER SR7300
UP
SELECTOR
VOLUME
DOWN
MEMORY
TUNING
MODE
F/P
CLEAR
S-DIRECT MULTIROOM
MUTE
A/D7.1CH INPUTSPEAKERS A/B
POWER ON/STANDBY
PHONES
ENTER
STANDBY
AUX1 INPUT
S-VIDEODIGITAL VIDEO L AUDIO R
DSS/VCR2
AUX1 AUX2
VCR1
DVD
TV
CD
CD-R
TAPE
TUNER
ATT
SELECT
@0
!3
!1 !2yt
!5 !6
rew
u
@1
q
!7 !8
o
!9
!0
i
!4
q POWER switch and STANDBY indicator
When this switch is pressed once, the unit turns ON and display
appears on the display panel. When pressed again, the unit turns OFF
and the STANDBY indicator lights.
When the STANDBY indicator is turned on, the unit is NOT
disconnected from the AC power.
w SELECT (MULTI FUNCTION MODE
SELECT) button
Press this button to change the mode for MULTI FUNCTION control
dial.
e SURROUND MODE Selector & MULTI
FUNCTION control dial
This dial changes surround mode sequentially or select contents of
OSD menu system.
r ENTER (MULTI FUNCTION ENTER)
button
Press this button to enter the setup by MULTI FUNCTION dial.
t CLEAR button
Press this button to cancel the station-memory setting mode or preset
scan tuning. (See page 35)
y MEMORY button
Press this button to enter the tuner preset memory numbers or station
names. (See page 35)