Filter
Top Products
ENGLISH
39
5 PREFERENCE
•
MULTI ROOM SETUP :
“5-1 MULTI ROOM SETUP”
(see page 40)
•
DC TRIGGER SETUP :
“5-2 DC TRIGGER SETUP”
(see page 40)
1.
Select “5. PREFERENCE” from MAIN MENU
with the 3
or
4 cursor buttons and press the
ENTER button.
5.PREFERENCE
MULTI ROOM SETUP
DC TRIGGER SETUP
STANDBY : NORMAL
BILINGUAL : MAIN
HDMI AUDIO: ENABLE
RETURN NEXT EXIT
2.
Select the desired menu with the 3
or
4 cursor
buttons and press the ENTER button.
STAND BY:
When this is set to “ECONOMY”, you can reduce
the power consumption when the unit is in the
Standby mode. When “ECONOMY” is selected,
“TV AUTO” and “RS-232C” are disabled when the
unit is in the Standby mode.
BILINGUAL:
In the Bilingual mode, Dolby Digital and DTS
output is set to either “MAIN” or “SUB”. Select
“BILINGUAL” with the 1 or 2 cursor buttons, then
select MAIN ↔ SUB ↔ MAIN+SUB with the 1 or
2 cursor buttons.
HDMI AUDIO:
This setting determines whether to play back audio
input to the HDMI jacks through the SR6001 or
output it through the receiver to a TV or projector.
ENABLE: The audio input to the HDMI jacks
can be played back by this receiver.
In such case, audio signals are not
output to the TV or projector.
THROUGH: The audio input to the HDMI jacks is
not output from the speaker terminals
of the SR6001. Audio data is output
directly to the TV or projector. This
setting is used to listen to audio on a
multi channel TV, etc.
After you complete this portion of the setup, move the
cursor to “RETURN” with the 3, 4, 1 and 2 cursor
buttons and press the
ENTER
button.
DC TRIGGER SETUP
DC TRIG:DISABLE
TV : TAPE :
DVD : CD/R :
VCR : AUX2 :
DSS : TUNER :
AUX1 : 7.1CH :
RETURN NEXT EXIT
MULTI ROOM SETUP
AUDIO :DVD
SLEEP :OFF
MONO/ST:STEREO
MULT:OFF MSPK:
VOL :VARI VOL :
LEV :-90dB LEV :
RETURN BACK EXIT
5.PREFERENCE
MULTI ROOM SETUP
DC TRIGGER SETUP
STANDBY : NORMAL
BILINGUAL : MAIN
HDMI AUDIO: ENABLE
RETURN NEXT EXIT