Filter
Top Products
ENGLISH
6
e
HEADPHONE jack for stereo headphones
This jack may be used to listen to the SR6001’s
output through a pair of headphones. Be certain
that the headphones have a standard 1/4” stereo
phono plug. Note that the main room speakers will
automatically be turned off when the headphone
jack is in use.
Notes:
• When using headphones, the surround mode will
change to STEREO and Dolby Headphone by
MENU and Cursor button.
• The surround mode returns to the previous setting
as soon as the headphone plug is removed from the
jack.
r SURROUND MODE button
You can select the surround mode by pressing this
button.
t AUTO (Auto surround) button
Press this button to select the AUTO mode from
the surround modes. When this mode is selected,
the receiver determines the surround mode
corresponding to a digital input signal automatically.
y MULTI (Multi Room) button
Press this button to activate the Multiroom system.
“MULTI” indicator will be illuminated in the display.
(See page 56)
q POWER switch and STANDBY
indicator
Press the button to turn the power ON, and press
again to turn it OFF. If the POWER switch is in the
ON position, the power of this unit can be turned ON/
OFF by pressing the POWER button on the remote
control unit.
When this unit is in the standby mode with the
POWER switch set to the ON position, pressing the
ENTER button also allows to turn the power on.
The STANDBY indicator lights up when this unit
is the standby mode (power OFF) by the remote
control unit.
w INPUT SELECTOR knob
(AUDIO/ VIDEO)
This knob is used to select the input sources.
Note:
• When the input source is set to TUNER, it is possible
to select the video source separately.
u MULTI SPEAKER button
Press this button to activate the Multiroom Speaker
system. “MULTI” indicator will be illuminated in the
display.
(See page 56)
i BAND button
Press this button to switch between FM and AM in
the TUNER mode.
o T-MODE button
Press this button to select the auto stereo mode or
mono mode when the FM band is selected.
The “AUTO” indicator lights in the auto stereo mode.
(See page 52)
!0 MEMORY button
Press this button to enter the tuner preset memory
numbers or station names. (See page 53)
!1 CLEAR button
Press this button to cancel the station-memory
setting mode or preset scan tuning. (See page 54)
!2
INFRARED receiving sensor window
This window receives infrared signals for the remote
control.
!3 VOLUME control knob
Adjusts the overall sound level. Turning the control
clockwise increases the sound level.
!4 AUX1 INPUT jacks
These auxiliary video/audio input jacks accept the
connections of a camcorder, portable DVD, game
etc. When not using these jacks, protect with the
included jack covers.
How to Attach the Front AUX Jack Cover
AUX 1 INPUT
AUDIO
S-VIDEO
DIGITAL
VIDEO
L
R
UP
PUSH
PUSH
Front AUX Jack Cover
!5
PURE DIRECT button and indicator
When this button is pressed once, “SOURCE
DIRECT” appears on the FL display. If pressed
again, “PURE DIRECT” appears. After 2 seconds,
the FL display indication goes out.
In the source/pure direct mode, the tone control
circuitry and bass management are bypassed.
Notes:
• The surround mode is automatically switched to
AUTO when the pure direct function is turned on.
• Additionally, speaker configurations are fixed
automatically as follows.
Front SPKR = LARGE
Center SPKR = LARGE
Surround SPKR = LARGE
Surround Back SPKR = LARGE
Sub woofer = YES
!6 HT-EQ button
Press this button to switch between HT-EQ ON/Off.
!7 7.1CH INPUT button
Press this button to select the output of an external
multichannel player.
!8 MENU button
This button is used to enter the SETUP MAIN
MENU.
!9
Cursor (
5, ∞, 2, 3
) / ENTER button
Use these buttons when operating the SETUP MAIN
MENU and TUNER function.
@0 EXIT button
This button is used to exit from the SETUP MAIN
MENU.
@1 DISPLAY button
When this button is pressed, the FL display mode
is changed as Input display → Surround Mode →
Auto-display Off → Display Off → Function name
display and the display off indicator (DISP) lights up
is condition DISPLAY OFF.
@2 MultEQ button / MIC jack
Press to automatically measure speaker characteristics
using the included microphone. (See page 31)
FRONT PANEL
DIGITAL
RLVIDEO
S-VIDEO
AUX 1 INPUT
AUDIO
VOLUME
UP
DOWN
STANDBY
PHONES
INPUT SELECTOR
AV SURROUND RECEIVER SR6001
MultEQ
ENTER
MENU
PURE DIRECT HT-EQ
7.1CH INPUT
MODE AUTO
MULTI
A/B
T-MODE
MEMORY CLEAR
DISPLAY
EXIT
SPEAKERS
BAND
MIC
PURE DIRECT
SURROUND
SPEAKER
MULTI
DSD
POWER ON/OFF
L
C
R
SL S SR
LFE
DIGITAL
SURROUND
V-O FFDISP MULTI AUT O TUNED STSPKR A B
NIGHT
PEAK ANALOG
DIGITAL
ATT
SLEEP
SURR DIRECT
AUTO
DISC 6.1 MTX 6.1 EQ
PCM
AAC
!8 @0 @2!9
q tyur !2 !3 !4ew
!5 !6 !7 @1 @3
io!0!1