Filter
Top Products
3
ENGLISH
Notes about the discs
* Handle the discs carefully so as not to scratch their
surfaces.
* Keep the surfaces of the discs clean at all times.
When cleaning the surfaces of discs, always be sure to use
the special cleaner and wipe the surfaces in the directions
shown in the figure below.
* Do not attach pieces of paper or stickers to the label
surfaces of the discs.
When a disc has a piece of plastic tape or rental CD label
with paste protruding from the edge or when a disc still bears
traces of sticky tape or adhesive labels, do not attempt to
play it. If such a disc is played on the CD player, you may
find that you cannot remove it or that some other kind of
malfunctioning may occur.
* Do not use discs which come in special shapes.
Do not attempt to play heart-shaped or octagonal discs or
discs with any other special shapes. You may find that you
cannot remove them or that some other kind of
malfunctioning may occur in the player.
* Use discs which satisfy the CD standards such as those
with the “CD logo”, “
” or “
TEXT
” mark on their disc
label surfaces.
No guarantees are made for playback if discs which do not
satisfy the appropriate CD standards are used.
Similarly, no guarantees are made for their sound quality
even if it is possible to play such discs.
* To protect your discs from damage, avoid placing them
in the following locations.
• Where they will be exposed to direct sunlight or where
they will be close to a heater or other heat-radiating
appliance
• Where the humidity level is high or it is very dusty
• Near a window or other such location where they may be
exposed to rain
* Get into the habit of putting the discs back in their cases
after use.
1. BEFORE USING
Inappropriate places for installation
To keep your player in perfect working order for the longest
possible time, avoid installing the player in the following
locations.
• Wherever it will be exposed to direct sunlight
• Wherever it will be close to a heater or other heat-radiating
appliance
• Wherever the humidity is high or ventilation is poor
• Wherever it is very dusty
• Wherever it will be subject to vibration
• On top of a rickety stand or in an unstable location which
is tilted at an angle
• On top of an amplifier or other component which dissipates
a great deal of heat
• In an audio rack with little space at the top and bottom or
other location where the heat dissipation will be obstructed
To ensure proper heat dissipation, install the player while
leaving clearances between the player and wall or other
components, as shown in the figure below.
DISC
TTL
TRK
PEAK
TTL
TIME
RNDM
PROG
A
–
BRPT 1
PITCH
EDIT
TEXT
12 34 56 78 91011121314151617181920
• Wipe the surface radially
from the center.
• Do not wipe the surface in
the circumferential direction.
0.1 m or more 0.1 m or more
0.1 m or more
0.1 m or more
About playing copy-controlled CDs
Some copy-controlled CDs may not conform to official CD
standards. They are special discs and may not play on the
CD5001.
05.7.6, 9:00 AMPage 3