Marantz CD5001 Stereo System User Manual


 
8
ENGLISH
Front panel
5. NAMES AND FUNCTIONS
z POWER ON/STANDBY switch and Standby
indicator
This is used to turn the players power ON and STANDBY.
When it is pressed, the display lights and the power is
turned on; when it is pressed again, the power is turned
off and STANDBY indicator lights.
x Disc tray
This is where the CD to be played is placed.
c OPEN/CLOSE
00
00
0 button
This is used to open and close the disc tray. When it is
pressed, the disc tray opens; when it is pressed again, it
closes.
v Remote sensor
This senses the infrared control signals sent from the
remote control unit.
b DISPLAY OFF indicator
This lights in the DISPLAY OFF mode (when the display is
off).
n Display
This shows the settings, play status, text information, etc.
m TIME button
Switches the time shown on the display to the remaining
time of the current track or the remaining time of the entire
disc.
With a CD-TEXT disc, this switch is also used to switch
the displayed information from the text display mode to
the time display mode.
, EDIT button
Press to engage the editing function, which helps record
a disc onto a tape by playing the tracks according to the
tape length and leaving a nonrecorded blank of 4 seconds
between every track.
DISC
TTL
TRK
PEAK
TTL
TIME
RNDM
PROG
A
B RPT1
PITCH
EDIT
TEXT
12 34 56 78 91011121314151617181920
z x m , . ⁄0 ⁄4 ⁄5 ⁄6 ⁄7
cvb ⁄1 ⁄2 ⁄3
n
. PEAK button
When the PEAK button is pressed, searching for the
loudest passage (peak) on a CD or in a program.
⁄0 DISPLAY OFF button
This is used to turn off the display (DISPLAY OFF mode).
When it is pressed, the display is turned off; when it is
pressed again, the display comes on.
⁄1 PLAY
33
33
3 button
This is used to start play.
⁄2 STOP
77
77
7 button
This is used to stop play.
⁄3 PAUSE
88
88
8 button
This is used to temporarily suspend play.
⁄4
44
44
4/
11
11
1 (previous track/search backward)
button
When this button is pressed, play returns to the start of
the track now being played. The same number of tracks
as the number of times the button is pressed can be
skipped in the reverse direction. When the button is held
down, tracks are searched (fast backward).
⁄5
¡¡
¡¡
¡/
¢¢
¢¢
¢ (search forward/next track) button
The same number of tracks as the number of times the
button is pressed are skipped in the forward direction.
When the button is held down, tracks are searched (fast
forward).
⁄6 PHONES jack
The headphones are connected to this jack. Use
headphones that come with a standard plug.
⁄7 PHONES LEVEL control
This is used to adjust the headphones volume level. The
level increases when it is turned clockwise.
05.7.6, 9:00 AMPage 8