Filter
Top Products
2
NAMES AND
FUNCTIONS
NAME OF PARTS
BASIC
OPERATION
ADVANCED
OPERATION
SETUP
TROUBLESHOOTING
OTHERSBEFORE USE NAME OF PARTS
BEFORE USE NAMES OF PARTS
CHECKING THE UNIT AND SUPPLIED ACCESSORIES
Before use, check that the main unit and supplied accessories given below are assembled.
• Anamorphic lens x 1
• Lens Slider x 1
• Base plate x 1
• AC/DC adapter x 1
• AC power cord (for U.S.A.) x 1
• AC power cord (for Europe) x 1
• AC power cord (for Japan) x 1
• Trigger cable
• Mounting screws (machine screw (M3 x 8) x
6, hexagon head bolt (M8 x 10) x 2, decorative
screws (M3 x 8) x 2)
• Washers x 2 (for 3-mm screws x 2, for 8-mm
screws x 2)
• Spring washers x 2
• User
’
s guide x 1
• Warranty card
U.S.A. x 1
Canada x 1
Japan x 1
Height/tilt adjustment screw (Page. 10)
POWER ON indicator (Page. 3)
Anamorphic lens back/forth
adjustment screw (Page. 10)
Trigger signal input indicator (Page. 3)
Anamorphic lens left/right
adjustment screw (Page. 10)
+5 V DC jack (Page. 3)
Trigger signal input jack
(Page. 3)
Trigger signal output jack
(Page. 13)
Remote control receiver (Page. 4)
Focus adjustment screw (Page. 11)
Lens center mark