Filter
Top Products
INSTALLATION AND REMOTE CONTROL
7
This CD player is supplied including:
– a remote control
– 2 batteries for the remote control
– a connection cable
– this instruction booklet
Usual connection, LINE OUT
1 Insert the red plug of the supplied connection cable into R
and the other plug into L.
2 Insert the other side of the cable into the corresponding
sockets of the CD or AUX input of your amplifier.
Important!
You may also use the TUNER or TAPE, but never the PHONO
input of your amplifier!
Digital connection, DIGITAL OUT
Never connect this socket to a non-digital input – such as
AUX, CD, PHONO, TAPE – of an amplifier. This output supplies
a digital signal and can therefore only be connected to a
digital input.
1 Insert an optional coaxial cable into DIGITAL OUT.
2 Insert the other side of the cable into the digital input of
your digital device (e. g. CD Recorder).
The type plate is located on the bottom of the CD player.
1 Check whether the mains voltage as shown on the type
plate corresponds to your local mains voltage. If it does not,
consult your dealer or service organisation.
2 Connect the mains cable to the wall socket. This switches
on the mains supply.
Note: To disconnect the CD player from the mains completely,
remove the mains plug from the wall socket.
Batteries
• Open the battery compartment of the remote control and
insert 2 alkaline batteries, type AAA (R03, UM-4).
Remove batteries if they are flat or the remote control is not
going to be used for a long time.
Batteries contain chemical substances, so they should
be disposed of properly.
TIME......................switches through the different time
informations
yy
............................switches the CD player to standby
PROG.....................programs track numbers
FADE......................fades CD play out and in
SHUFFLE...............plays a CD or a program in random order
DIGITS 0–9 ...........selects a track by number
HIGHLIGHT...........plays the beginning of each track or – if a
CD-Text disc contains highlights – the
highlights of a CD
REPEAT.................repeats a track, a program or the entire
CD
VOLUME –............decreases the volume level
VOLUME +............increases the volume level
PLAY 2..................starts CD play
PREV. ∞ ...............selects the beginning of the current or a
previous track
NEXT §................selects the beginning of a subsequent
track
STOP 9 .................stops CD play and clears a program
5...........................searches backward
PAUSE ;................interrupts CD play
6...........................searches forward
CD TEXT................switches through the different CD-Text
information
SCROLL.................scrolls CD-Text information
REPEAT A/B .........repeats a selected part of the CD
Remote control
Mains
Connections
Accessories
English
RE
PEAT A
/B
CD TEXT
PA
USE
SCRO
LL
NEX
T
PREV
.
VOLUM
E
REPEAT
T
IM
E
P
R
O
G
R
AM
FA
D
ER
SC
AN
SH
U
F
FLE
1
2
3
4
5
7
8
0
6
9
y
STO
P
PL
AY
–
+