Filter
Top Products
ADDITIONAL FUNCTIONS
12
It is possible to set up the CD player in a way that it will
calculate which tracks will fit on your recording media. It is
only possible to use the edit function if a disc has not more
than 29 tracks.
If you use NORMAL the recording stops after the last track
that fits on one side of your recording media. Notice that CD-
Recordables are single-sided only! If you use OPTIMAL
some tracks will be skipped to minimise the unused space on
your recording media. The sequence of the tracks stays as the
original.
1 Insert a CD and, if desired, program track numbers.
2 Press EDIT to start the setup.
y The display shows NORMAL.
3 Press PREV. ∞ or NEXT § to switch through the different
scan modes.
y NORMAL, OPTIMAL, STOP… (STOP aborts the
edit function).
4 As soon as the desired edit mode is displayed press EDIT.
y The display shows C 90.
5 Press PREV. ∞ or NEXT § to switch through the different
recording times and media.
y C 100, C 120, CDR 21, CDR 60,
CDR 74, C30, C 45, C 60, C 90…
Note: C is for cassette, CDR is for CD-Recordable and
CD-Rewriteable and therefore for single-sided
recording only.
6 As soon as the desired recording time and media is
displayed press EDIT.
y A, the number of tracks and the playing time are
displayed.
7 Start your recording and press PLAY 2 to start CD play.
y If cassette (C) was selected the CD player pauses after
playing the calculated tracks for side A. If CD-
Recordable (CDR) was selected the CD player stops.
8 If required switch tape sides.
9 Press PLAY 2 to start CD play again.
y B, the number of tracks and the playing time are
displayed. The remaining tracks for side B are played.
Note: It is possible to switch between A and B by using
PREV. ∞ or NEXT § .
Recording setup
English
HIGHLIGHT SHUFFLE FADE
PEAKEDITPROG
STOPPLAY
PREV PAUSE NEXT
PHONES
LEVEL
Environmental information
All redundant packing material has been omitted. We have
done our utmost to make the packaging easily separable
into three mono materials: cardboard (box), polystyrene foam
(buffer) and polyethylene (bags, protective foam sheet).
Your set consists of materials which can be recycled if
disassembled by a specialized company. Please observe the
local regulations regarding the disposal of packing
materials, exhausted batteries and old equipment.