Filter
Top Products
38 Quick Programming (cont’d)
10
Press the POWER button to turn off the VCR. The
r
light
will appear on the display panel. (The
r
light and the Cassette-
Inside light will flash when you turn off the VCR if there is not a
tape in the VCR.) The VCR must be turned off for a timer
recording to take place. Leave the Cable Box/DBS on, if
applicable.
9
Press the EXIT/STATUS button. PROGRAM WAS
COMPLETED/PLEASE TURN OFF VCR FOR TIMER
RECORDING will appear on the screen. If PROGRAM NOT
COMPLETED appears, try again from step 1.
8
• If you want to record the program one time only, go to
step 9. You may also press the Number 8/DAILY or
Number 9/WEEKLY button repeatedly to select a ONE TIME
PROGRAM.
• If you want to record the program daily, press the
Number 8/DAILY button so that DAILY PROGRAM
appears at the top of the screen. The VCR will record a
program every day from Monday through Friday, starting at the
same time and recording for the same length of time.
• If you want to record the program every week, press
the Number 9/WEEKLY button so that WEEKLY
PROGRAM appears at the top of the screen. The VCR
will record a program on the same day at the same time and for
the same length of time every week.
DAILY PROGRAM (MON-FRI)
PROGRAM 1
CHANNEL +/– 12
START +/– 08:00 PM
STOP +/– 10:00 PM
REC SPEED SLP
DATE +/– 07/31/99
SATURDAY
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
7
Press the Number 3/DATE+ or Number 6/DATE– button
to set the recording date. Every time you press a button, the
date changes in one-day increments. If you press and hold a
button, the date changes quickly. The day of the week will appear
automatically. (You cannot program the VCR to record more than
one year in advance.)
ONE TIME PROGRAM
PROGRAM 1
CHANNEL +/– 12
START +/– 08:00 PM
STOP +/– 10:00 PM
REC SPEED SLP
DATE +/– 07/31/99
SATURDAY
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
• If you leave the VCR on past the
scheduled start time of a timer
recording, you will not be asked again
to turn off the VCR. The VCR might
store the recording for the same time
and day in the next year. Or, the
VCR may start recording when you
turn off the VCR power.
• If the end of the tape is reached
during a timer recording, recording
will stop. The VCR will eject the tape,
then turn itself off.
• If PROGRAM NOT COMPLETED/
CLASH appears at step 9, the timer
recording you just programmed
overlaps another timer recording. The
timer recording you just programmed
will not take place. The timer
recording menu will reappear. To
cancel a timer recording, see page 39.
• If you forget to turn off the VCR,
PLEASE TURN OFF VCR FOR TIMER
RECORDING flashes on your TV
screen two minutes before a timer
recording starts. To remove the
message, press the CLEAR button.
Helpful Hints
9
10
7
8
VCRTV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
EJECT
CHVOL
EXIT/STATUS
TIMER
SMARTPICTURE
SKIP SEARCH INDEX AUDIO/MUTE
MENU
-
+
CBL / DBS
1 2 3
4 5 6
7 8 9
START STOP DATE
DBS DAILY
PLAY
REW FF
STOP
WEEKLY
/OTR
RECREC
-
+
-
+
SPEED
0
CLEAR
.............
.............
........
........
/OK