Filter
Top Products
Automatic Channel Setup 11
5
Wait for the VCR to set up
channels.
Although your VCR may automatically memorize the channels you
receive when you turn it on for the first time, this function lets
you set up channels again. Make each entry within one minute of
the previous entry.
5
Wait for a few minutes while the VCR sets up channels.
When programming is complete, AUTO CH. SET COMPLETED
will appear on the screen. Then, the programming of the lowest
channel number placed in the VCR’s memory will appear on the
screen. Now when you press the CH(annel) 8/9 button, you will
scan only through channels you receive.
1
Press the VCR button, then press the MENU button.
2
Press the PLAY 8 or STOP 9 button to select TUNER
SET UP, then press the FF :/OK button.
3
Press the FF :/OK button repeatedly so that ANT (if you
have an antenna) or CABLE (if you have a cable
connection) appears beside CABLE/ANTENNA.
4
Press the STOP 9 button to select AUTO CH.
PROGRAMMING, then press the FF :/OK button. AUTO
CH. SET PROCEEDING PLEASE WAIT and a scale that shows the
progress of channel setup will appear on the screen. The VCR will
memorize all the channels you receive.
• The two Line Input modes will
always be stored in the VCR’s
memory at channel 00. To select
A/V IN FRONT or A/V IN REAR,
press 0,0, then press the CH(annel)
8/9 button so that A/V IN FRONT
or A/V IN REAR appears on the
screen briefly. To exit Line Input
mode, use the CH(annel) 8/9
button to select a channel other
than 00.
Helpful Hint
SELECT , 9 CHOOSE >/OK
→ CABLE/ANTENNA CABLE
AUTO CH. PROGRAMMING
ADD/DELETE CH.
TO END PUSH EXIT
SELECT , 9 CHOOSE >/OK
→ VCR SET UP
TUNER SET UP
INITIAL SET UP
TO END PUSH EXIT
2-4
1
1
VCRTV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
EJECT
CHVOL
EXIT/STATUS
TIMER
SMARTPICTURE
SKIP SEARCH INDEX AUDIO/MUTE
MENU
-
+
CBL / DBS
1 2 3
4 5 6
7 8 9
START STOP DATE
DBS DAILY
PLAY
REW FF
STOP
WEEKLY
/OTR
RECREC
-
+
-
+
SPEED
0
CLEAR
.............
.............
........
........
/OK