Filter
Top Products
Timer Recording with the VCR Plus+ Programming System (cont’d) 35
Turn off the VCR for a timer recording! Put a tape
in the VCR. Leave the Cable Box/DBS on.
9
Press the POWER button to turn off the VCR. The VCR
must be turned off for a timer recording to take place.
The
r
light will appear on the display panel. The
r
light and the
Cassette-Inside light will flash when you turn off the VCR if there
is not a tape in the VCR.
7
Press the SPEED button to select the tape speed. The
selected tape speed, SP or SLP, will appear beside REC SPEED.
8
Press the EXIT/STATUS button. PROGRAM WAS
COMPLETED/PLEASE TURN OFF VCR FOR TIMER
RECORDING should appear on the screen. (If PROGRAM NOT
COMPLETED appears, begin again from step 1.) After five
seconds, the on-screen display will disappear.
• Do not select DAILY at step 6 if the
VCR Plus+ recording you chose is on
a Saturday or Sunday. The recording
will not occur, even though the VCR
may accept the way you
programmed the recording.
• To exit the VCR Plus+ programming
system at any step, press the
EXIT/STATUS button.
• PROGRAM NOT COMPLETED/
CLASH may appear on the screen
for five seconds at step 8 if the
timer recording you programmed
overlaps another timer recording. To
cancel the overlapping timer
recording, follow the steps on page
39.
• If you want to check your timer
recordings, follow the steps on page
39.
Helpful Hints
6
• If you want to record the program one time only, go to
step 7. You also may press the Number 8/DAILY or
Number 9/WEEKLY button repeatedly to select a ONE TIME
PROGRAM.
• If you want to record the program daily, press the
Number 8/DAILY button so that DAILY PROGRAM
appears at the top of the screen. The VCR will record a
program every day from Monday through Friday, starting at the
same time and recording for the same length of time.
• If you want to record the program every week, press
the Number 9/WEEKLY button so that WEEKLY
PROGRAM appears at the top of the screen. The VCR
will record a program on the same day, at the same time, for
the same length of time every week.
5
Press the FF :/OK button. If the VCR PLUS+ and CABLE/TV
channel lists appear on the screen, the CABLE/TV channel has not
been set for the VCR PLUS+ channel of the program you have set
in step 4. Press the Number buttons to enter the CABLE/TV
channel number from your list on page 32, then press the
FF :/OK button.
DAILY PROGRAM (MON-FRI)
PROGRAM 1
CHANNEL +/– 12
START +/– 08:00 PM
STOP +/– 10:00 PM
REC SPEED SLP
DATE +/– 07/31/99
SATURDAY
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
5
7
6
8
9
VCRTV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
EJECT
CHVOL
EXIT/STATUS
TIMER
SMARTPICTURE
SKIP SEARCH INDEX AUDIO/MUTE
MENU
-
+
CBL / DBS
1 2 3
4 5 6
7 8 9
START STOP DATE
DBS DAILY
PLAY
REW FF
STOP
WEEKLY
/OTR
RECREC
-
+
-
+
SPEED
0
CLEAR
.............
.............
........
........
/OK