Filter
Top Products
EN - 36
10.2. Audio Input Mapping
Use to map a connected HDMI device to the correct Audio Input for automatic Audio Source switching.
If your TV is compatible with HDMI-CEC System Audio Control, this unit will automatically switch to the selected audio
Input to output sound from your TV. “Audio Input Mapping ” is only available when “System Audio Control” is set to “On”.
1. Use [] to select “Settings” in the Home Menu, then press [OK].
2. Use [] to select “HDMI”, then press [OK].
3. Use [] to select “Audio Input Mapping ”, then press [OK].
4. Press [HOME] to Exit.
10.3. HDMI Video Resolution
Set the resolution of the video signal being output from the HDMI OUT jack.
You can select the desired “Video Resolution” among the settings listed below: “Auto”,“480p”.
Actual Output Resolution:
Composite video output (VIDEO OUT) jack can only output 480i/60.
• For AVCHD, outputting the video in 24 frames per second (1080p/24) is not available.
D Note
• The selected resolution must also be supported by your display device.
• If your TV and the unit are connected by a DVI cable and if “Auto” is selected, “480p” will be automatically in effect.
• Refer also to your TV’s manual.
• When connected to an HDCP incompatible display device, the picture will not be displayed properly.
• The audio signals from the HDMI OUT jack (including the sampling frequency, the number of channels and bit length)
may be limited by the connected device.
• Among the display devices that support HDMI, some do not support audio output (for example, projectors).
While connected to a device such as a projector, audio will not be output from the HDMI OUT jack.
• When this unit’s HDMI OUT jack is connected to a DVI-D compatible display device(s) (HDCP compatible) with an
HDMI-DVI converter cable, the signals are output in digital RGB.
• HDMI video resolution does not work during the playback of a BD-video.
HOME A “Settings” A “HDMI” A “Video Resolution”
Setting in the
“
Video Resolution”
Source
480i/60 720p/60 1080i/60 720p/24 1080p/24
Auto
The highest resolution supported by your display device will automatically be in effect.
480p
480p/60
Copyright protection system
To play back the digital video images of a BD-video or DVD-video via an HDMI connection, it is necessary that both the player and the
display device (or an AV receiver / amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protection
system). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV device. This unit
supports HDCP. Please read the operating instructions of your display device (or an AV receiver / amplifier) for more information.
Video Out
fun-Link (HDMI CEC)
System Audio Control
Audio Input Mapping
Video Resolution
Deep Color
> On
> On
>
> Auto
> Auto
Audio Out
HDMI
Playback
Others