Filter
Top Products
25
T
here may come a time when you want to
Block All the television’s channels. Maybe you
don’t want your children to watch TV for a given
period time. With the Block All control, ALL avail-
able channels (including the A/V Inputs) can be
set to be blocked at the same time.
1
Press the MENU button on the
remote to show the on-screen menu.
2
Press the CURSOR UP ▲ or
DOWN ▼ button until the word
FEATURES is highlighted.
3
Press the CURSOR RIGHT ᮣ
button to display the FEATURES
menu options.
4
Press the CURSOR UP ▲ or
DOWN ▼ button until the words
SmartLock are highlighted.
5
Press the CURSOR RIGHT ᮣ
button.
6
Enter the correct access code
number. “XXXX” shows on the
Access Code display as you press the
NUMBERED buttons. SmartLock
menu options will be displayed.
7
Press the CURSOR UP ▲ or
DOWN
▼ buttons until the words
BLOCK ALL are highlighted.
8
Press the CURSOR RIGHT ᮣ
button to turn Block All ON or OFF.
When ON is selected, ALL available
channels will be blocked.
9
When finished, press the STA-
TUS/EXIT button to remove the
menu from the screen.
HOW TO BLOCK ALL CHANNELS AT THE SAME TIME
Features
SmartLock
Format
Access Code
XXXX
Features
SmartLock
Format
Access Code
- - - -
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
More...
Main
Picture
Sound
Features
Install
SmartLock
Format
Features
SmartLock
Format
Timer
Start Time
Stop Time
Channel
Activate
Display
SmartLock
Block Channel
Setup Code
Clear All
Block All
Movie Rating
TV Rating
Off
Channel 12
Blocked By SmartLock
Channel Blocking
Access Code
- - - -
SmartLock
Block Channel
Setup Code
Clear All
Block All
Movie Rating
TV Rating
On
VOL
123
POWER
CH
CH
VOL
VOL
STATUS
EXIT
SLEEP
MUTE
SMART
PICTURE SOUND
SURF
A/CH
45
6
789
0
CC
MENU
MAGNAVOX
3
5
8
1
2
4
7
6
9
If you tune to a blocked channel and enter
your Access Code to view the channel,
ALL blocked channels will be viewable until
the TV has been turned off. When the TV
is powered back ON, the previously
blocked channels will be blocked again.
HELPFUL HINT
NOTE: The 0,7,1,1 access code shown
on this page is the default code or a
way to reset the code when the current
access code is not known.
Enter your Access Code to
view a tuned channel that is
blocked with Block Channel.
Some models refer to SmartLock as
AutoLock, your TV may show AutoLock
instead of SmartLock in the on-screen
menu. These features are the same.