Filter
Top Products
11
C
omponent Video inputs provide for the high-
est possible color and picture resolution in
the playback of digital signal source material,
such as with DVD players. The color difference
signals (Pb, Pr) and the luminance signal (Y) con-
nected and received separately, which allows for
improved color bandwidth information (not possi-
ble when using composite video or S-Video con-
nections).
1
Connect the Component (Y, Pb,
Pr) Video OUT jacks from the DVD
player (or similar device) to the (Y, Pb,
Pr) in(put) jacks on the TV. When
using the Component Video Inputs, it
is best not to connect a signal to the
AV1 IN Video Jack.
2
Connect the red and white
AUDIO CABLES to the Audio (left
and right) output jacks on the rear of
the accessory device to the Audio (L
and R) AV1 IN Input Jacks on the TV.
3
Turn the TV and the DVD (or
digital accessory device) ON.
4
Press the CH + or CH- buttons to
set the TV to its CVI channel. (Go to
your lowest channel,for example channel
1, then change channels down to find the
correct source channel.)
5
Insert a DVD disc into the DVD player
and press the PLAY ᮣ button on
the DVD Player.
L/Mono
Monitor out
VIDEO
S-VIDEO
AV1 in
Y
Pb
Pr
AV2 in
AUDIO
R
COMPONENT VIDEO INPUT
S-VIDEO
OUT
OUT
OUT
L
R
AUDIO
VIDEO
COMP VIDEO
Y
Pb
Pr
CVI
2
1
3
5
123
POWER
CH
CH
VOL
VOL
STATUS
EXIT
SLEEP
MUTE
SMART
PICTURE SOUND
SURF
A/CH
45
6
789
0
CC
MENU
MAGNAVOX
4
USING THE CVI (COMPONENT VIDEO INPUT) JACKS
The description for the component video
connectors may differ depending on the
DVD player or accessory digital source
equipment used (for example, Y, Pb, Pr; Y,
B-Y, R-Y; Y, Cr, Cb). Although abbrevia-
tions and terms may vary, the letters b and
r stand for the blue and red color compo-
nent signal connectors, and Y indicates the
luminance signal. Refer to your DVD or
digital accessory owner’s manual for defini-
tions and connection details.
Note: Component video and audio cables
are not supplied with the TV,but are avail-
able from Magnavox or electronics retailers.
HELPFUL HINT
Audio Cables
(Red and White)
Component Video
Cables
(Green, Blue, Red)
Back of TV
Accessory Device Equipped with
Component Video Outputs.
The CVI connection will be dominate over the AV1 in Video Input.
When a Component Video Device is connected as described, it is best
not to have a video signal connected to the AV1 in Video Input jack.