Filter
Top Products
17
User’s Guide
Using an Aux Send with a Plug-in
♦
Click on the associated INPUT menu button and select
an aux input source. In the example below, we have
chosen the Aux 5 Bus.
Send the Input Signal to the Aux Bus
1. Send a signal to a D8B mixer input channel (MIC/LINE
or TAPE IN).
2. Assign the input channel V-Pot/GUI
Control Pot to an aux send. We have
chosen AUX 5 according to the example
above.
3. Use the AUX 5 control to
adjust the input level to the
plug-in.
Remember to select an aux send before using the V-pot or GUI
Control Pot on the mixer input channel (MIC/LINE or TAPE IN).
GUI Control
Pot Assigned
to AUX 5