Filter
Top Products
22
Logitech®
The following tips and answers to frequently asked questions will help resolve problems
you may encounter. You can find answers to additional questions on our web site at
.
Press and hold the arrow for five seconds to bring Squeezebox back to the setup
menu.
Plug the power connector into Squeezebox while holding down the button on the
remote until you see the prompt.
Check all your network connections, and make sure that the DHCP server is running. Try
a different ethernet cable, even if the hub indicates a good link. Make sure you are using
the latest firmware for your router or access point.
You can connect Squeezebox directly to your computer (without a local network or
hub) using an ethernet crossover cable. You can purchase a crossover cable at most
retail computer stores. Configure your network adaptor and Squeezebox with static IP
addresses so that they can find each other. Visit and search
for for additional information.
If your network is using WEP encryption, you’ll need the hexadecimal WEP key for your
wireless network. Hexadecimal keys are either 10 or 26 digits of 0-9 or the letters A to
F. Some wireless access points or routers use text passwords for WEP. The configuration
software for your wireless device can show the key in hexadecimal. Airport users can
use Airport Admin Utilities. Use the Base Station menu to find the Equivalent Network
Password and use the value displayed.
Try using the following URL: . (Be sure to type the “” part,
as some versions of Internet Explorer require it when accessing a URL by IP address.)