Listen Technologies AO 6004 Stereo Receiver User Manual


 
Danish Interpretation Systems User Manual
Manual 01 18 04442
13
Technical specifications
Digital Section
Sound quality .........20 bit audio @ 32 kHz sampling frequency
Analogue Section
Output signal type...............ground lifting transformer balanced
Nominal output level: ...........................0 dBm at nominal input
Max. Output level:..........................................................15 dBm
Frequency response.................................................... 50-15kHz
Signal to noise ratio: .................................................. >85 dBA
Total harmonic distortion: .............................................< 0.1%
General
Power requirement...................................................24-48 V DC
Power consumption............................................. 2W maximum
Power supplied from
...................................CU 6005 / CU 6010 / EX 6010 / PS 6000
Temperature to guarantee specified performance
..............................5 Deg C. to 40 Deg C. (35 to 80% humidity)
Storage temperature
.......................... -20 Deg C. to 60 Deg C. (10 to 80% humidity)
Weight............................................................................ 0.84 kg
Dimensions (W x H x D).......... 180 (205) x 38 x 120 (120) mm
Dimensions in bracket are including brackets
Accessories supplied ..............................................User manual
Connectors
DCS-LAN network...............................................2 pieces RJ45
Analogue outputs connectors ...........4 - XLR3 male connectors
Remote Control commands in/out
By using SW 6000 the user can control the AO 6004 through
the CU 6005/6010.
The CU 6005/6010 can read/control the following settings:
*................................. Channel number for each output channel
*.............................................. Volume setting for each channel
The settings can only be read/controlled from the SW 6000.
The CU 6005/6010 continuously monitors the status of the AO
6004 to ensure that updated status of the unit is always present
on the CU 6005/6010.
Specifications are subject to change without notice.