Filter
Top Products
Danish Interpretation Systems User Manual
Manual 01 18 04442
9
one of the 31 language channels or one of the three
Floor channels:
Floor: automatic gain controlled output
Floor 1: loudspeaker unregulated audio
Floor 2: loudspeaker regulated audio
An ambience microphone will only be active on the
Floor channel, not on Floor 1 or Floor 2
Values: {Floor 2, Floor 1, Floor, 1,…, 30, 31}
The volume of the outputs can also be set if the
default settings are not appropriate.
Values: {Off, -40, -39,…, 14, 15}
Refer to the CAA and CUA User Manuals for more
details.
Normal operation
Powering up
Connect the AO unit(s) to the rest of the system via
the DCS-LAN connectors and connect the audio
outputs to the appropriate units (tape recorders,
infrared transmitters, etc.).
Switch on the power on the CU 6005/6010.
During the initialization the AO unit will
automatically assign channels to the outputs. The
unit is immediately ready to use after start-up unless
other channels need to be assigned to the outputs or
the channel volume needs to be adjusted. These
adjustments can only be done using the SW 6000.