Filter
Top Products
TToo rreeccoorrdd aa mmaaccrroo::
●
Access macro mode, following the instructions above (
To access macro
mode
) and select the ‘Record’ option.
●
Press the right-hand
‘‘mmuullttii--ffuunnccttiioonn’’
key, under the symbol.
The display will show ‘Start’.
Any keys you now press until you stop recording will be recorded in the macro
as well as performing their usual functions. Up to ten commands can be
recorded in a macro.
Example.
You may wish to record a macro, which selects the Main-room tuner, selects
preset 5 and plays at a low volume (e.g. for morning listening) :
Start the recording process as described above
Press
WWHHEERREE
to select the Main-room system
Press
WWHHAATT
to select tuner player
Press
DDOO
to select the preset function
Press the right hand
‘‘mmuullttii--ffuunnccttiioonn’’
key repeatedly to select preset 5
Press
VVOOLL--
to set a volume level of 20
TToo ssttoopp rreeccoorrddiinngg tthhee mmaaccrroo::
●
Press the
WWHHEERREE
and
OONN//OOFFFF
keys together to select Macro mode.
●
Press the right-hand
‘‘mmuullttii--ffuunnccttiioonn’’
key under the symbol to stop
recording.
The display will then show ‘Macro Complete’ followed by the number of the
macro you recorded.
Note:
Each macro can remember up to ten operations. You will be advised if you are
getting near this limit while recording a macro – the message ‘Remaining steps
2’ will be scrolled across the display.
9
Advanced functions
Macros
A very convenient and powerful feature built into the KNEKT RCU is the ability
to record a sequence of commands and replay them at a later time. This is
known as a macro. For example, you could record a command sequence to
select the radio, choose your favourite radio station, and set the volume to 20.
You can record up to five different macros, each one containing up to ten
commands, for your most frequently-used operations.
TToo aacccceessss mmaaccrroo mmooddee::
●
Press the
WWHHEERREE
and
OONN//OOFFFF
keys together so that the display shows
‘Macro’. Alternatively, you may have chosen to have Macro mode directly
available from the
WWHHEERREE
key, in which case you can select it by pressing
WWHHEERREE
(this is a programming option – consult your Linn Custom
Installer).
●
Select the number of the macro you want to use by pressing
WWHHAATT
.
You can have up to five macros, called Macro1 to Macro5.
●
Press
DDOO
to step between the four macro functions:
RReeppllaayy --
Replay a macro you recorded.
RReeccoorrdd --
Record a new macro.
KKeeyy -- -->>
Set up a macro so you can run it from a key.
EErraassee --
Remove a macro.
English
KNEKT Multi-room
Owner's Manual
KNEKT RCU advanced functions