Linn Klout Stereo Amplifier User Manual


 
UK USERS PLEASE READ THIS IMPORTANT SAFETY INFORMATION.
FUSE REPLACEMENT
This appliance is fitted with a non-rewireable 13 Amp mains plug. The plug
contains a 5 Amp fuse.
If the fuse has blown it can be replaced:
a) pull out the red fuse cover/carrier.
b) remove and dispose of the blown fuse.
c) fit a new 5 Amp BS1362 approved fuse into the carrier and push the
carrier back into the plug.
Always ensure the fuse cover is fitted. If the fuse cover is missing do not use
the plug. Contact your Linn retailer to obtain a replacement fuse cover. Fuses
are for fire protection and do not protect against electric shock.
MAINS PLUG REPLACEMENT
Should your mains plug need replacing and you are competent to do this
proceed as follows. If you are in doubt contact your Linn retailer or a
competent electrician.
a) Disconnect the plug from the mains supply.
b) Cut off the plug and dispose of it safely. A plug with bared conductors is
dangerous if engaged in a live socket.
c) Only fit a 13 Amp BS1363A approved plug with a 5 Amp fuse.
d) The cable wire colours or a letter will be marked at the connection points
of most quality plugs.
Attach the wires securely to their respective points. The Brown wire must
go to the Live pin, the Blue wire must go to the Neutral pin and the
Green/Yellow wire must go to the Earth pin.
e) Before replacing the plug top ensure that the cable restraint is holding
the outer sheath of the cable firmly and that the wires are correctly
connected.
iv