Filter
Top Products
7
ADDITIONAL CONNECTIONS
To operate the KLOUT via the KAIRN, connect the KAIRN
REMOTE IN
socket
to the KLOUT
REMOTE OUT
socket. Additional KLOUTs can be chained using
phono-phono interconnects from the
REMOTE IN
socket of one KLOUT to the
REMOTE OUT
socket of the next KLOUT.
MAINS CONNECTION
W
ARNING The KLOUT must be switched off and disconnected from the
mains before checking the fuse.
The KLOUT will be fitted with the correct fuse by your dealer. Before plugging
into the mains, check that the voltage selected is correct for the country of
use. To set the voltage, rotate the voltage selector on the underside of the
product until the appropriate voltage is aligned with the white marker.
OPERATION
The KLOUT can be switched on either manually or via the KAIRN mains
switch. A three-way switch is positioned on the back panel of the KLOUT.
To switch the KLOUT on manually, press the switch to the
ON
position. The
indicators will light red, there will be a click and after a few seconds, when
the power supplies are stabilised, the indicators will light green showing the
KLOUT is ready for use.
To control the KLOUT from the KAIRN, press the switch on the KLOUT to
STANDBY
Switch the KAIRN on. After a few seconds there will be a click
from the KLOUT, the indicators will light red then, after a few more seconds,
green. The KLOUT is ready for use.