Filter
Top Products
18
MAINTENANCE
The KARIK and NUMERIK are designed for long life. To reinforce our
commitment to customer satisfaction and extended product life, we have
included in the design of the KARIK a
DIAGNOSTIC OUTPUT CONNECTOR
for ease of maintenance. We recommend that you contact your dealer
approximately two years after purchase, to arrange for a free diagnostic check
on your KARIK.
CLEANING
Dust or finger marks can be removed using a soft, slightly damp
cloth. Avoid the use of domestic cleaning fluids.
W
ARNING Disconnect the mains supply first.
FUSE If the fuse in the mains inlet connector should blow, replace it with the
correct type only. To replace the fuse, first switch off and disconnect the
mains lead. Open the fuse drawer on the mains inlet connector by grasping
either side of the drawer front and pulling outwards. The drawer has two
compartments, the inner one contains the active fuse and the outer one
contains a spare fuse. Remove the blown fuse by poking it out from the under
side of the drawer using a small screwdriver or the end of a pen. Insert the
spare fuse into the inner compartment and close the drawer.
If the new fuse blows then there may be a fault and the complete unit should
be returned to your Linn dealer.