Filter
Top Products
5
Initial Inspection, Unpacking, and ContentsInitial Inspection, Unpacking, and Contents
Initial Inspection Initial Inspection
IInspect the shipping container for damage. If the shipping
container, packing material, amplifier, or accessories are damaged
or missing, notify your dealer and the shipper (if a claim is to be
made) immediately. Note:Note: Many shippers require notification and
inspection within twenty-four hours of delivery to determine the
nature of damages incurred.
Your MC-6 Multi-Channel Power Amplifier has undergone extensive
performance evaluations, listening tests, quality control inspections,
and a minimum seventy-two hour burn-in period prior to shipment
and should therefore be in perfect operating condition upon receipt.
If the amplifier does not operate correctly, please notify your dealer
immediately.
We strongly suggest that you save all packing materials. If the
amplifier is returned to your dealer or Jeff Rowland Design Group, the
original packing materials must be used for shipment to avoid
damage. Neither Jeff Rowland Design Group nor the shipper can
be held responsible for damages incurred during transit if the original
factory packing is not used. All factory returns require that Jeff
Rowland Design Group issue a Return Authorization (RA) number prior
to shipment.
Unpacking the AmplifierUnpacking the Amplifier
TThe MC-6 is a large and heavy amplifier. Due caution should be
taken when unpacking and installing the amplifier to avoid injury.
The amplifier should be unpacked by at least two people, and there
should be a portion of carpet or soft, padded cloth to stand the
amplifier on when unpacking it from the shipping case.
To unpack the amplifier, stand the shipping case upright and unlock
the top cover. Remove the top cover and open the gray liner bag
to reveal the handles of the amplifier. Using the handles, the
amplifier should be lifted straight out of the case and rested on its
rear handles, standing upright. From this position, the MC-6 can be
carefully and slowly lowered and set to rest on its feet and moved
into its final resting place or installation point.
ContentsContents
EEnsure that all of the auxiliary components listed below are enclosed
within the accessory box. Refer to the diagrams illustrated above
and verify the components included.
11 One (1) AC Power Cable
22 One set of four (4) Spiked Coupling Supports
33 One set of four (4) Compliant Isolation Pads
44 One (1) Speaker Terminal Hand Wrench (7/16 inch)
55 One (1) Warranty Card (In some countries, warranties are
provided by the respective importer.)