8
Colored Status indicator light
•The color of the BackTrack light tells you the current type of operation or status
Charging While Off or Mounted on Computer
• When switched OFF, or connected to computer via USB, audio capture or playback is not available
• When charging in this state, color indicates progess toward full charge, as follows
•Red (0-25% charge), orange (25-50%), yellow (50-75%), green (75-100%), white (full charge)
White: Startup/Shutdown/Busy
• Light will be continually white while starting up or shutting down
• Light will blink white while busy and unavailable for other functions
Blue: Auto Capture
• Flashing dark blue indicates ready to capture, but not capturing yet
•Continually dark blue indicates audio that will be captured if it continues long enough
•Pale blue confirms audio has continued long enough, and continues to be captured
•Light blinks pale blue rapidly several times to indicate end of captured event
Red: Forced Capture or Mic Clipping
•Red indicates forced capture (see page 5) or capturing playback as new marked event (see page 6)
•Light blinks rapidly several times to indicate end of capture
•During mic capture, the light will be red if clipping (overly loud audio) occurs
Green: Playback
•Light is green during playback, and blinks when in Play Only mode, but not currently playing
•When looped playback is enabled, color slowly fades between light green and dark green while playing
Purple: Low Memory
•Occasional puple blink means less than 30 minutes remaining, and double blink means less than 15 minutes
Yellow: Low Battery
•An occasional yellow blink indicates low battery charge (approximately less than 1 hour of operation)
• Light will fade from yellow to red and flash rapidly just prior to the battery being completely discharged
Status Light
Status
Light
MARK
INOUT
