LG Electronics DP1B Headphones User Manual


 
Network Setting
30 LG Multimedia Player User’s Manual
Connection Setting
[HOME]
Navigation button
and [OK]
[RETURN]
Using a wired network provides the best
performance, because the attached devices
connect directly to the network and are not
subject to radio frequency interference.
Before setting the wired network, you need to
connect the broadband internet to your home
network.
Note
If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then
set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using buttons.
Wired network Setting
Press [HOME] or [RETURN] to exit menu
or cancel the selection.
Choose [Network] [Connection setting] and press [OK]
By connecting the unit to a broadband home
network, you have access to services such
Home Link and NetCast
2) Static Mode
Select [Wired] and press [OK].
Select IP mode [Static] and press [OK].
Set [IP Address], [Subnet Mask], [Gateway]
and [DNS Server].
<- : Deletes the character.
<< : Move to previous block.
>> : Move to next block.
» Press [OK] to complete the network
connection.
1) Dynamic Mode
Select [Wired] and press [OK].
Select IP mode [Dynamic] and press [OK].
» Press [OK] to complete the network
connection.