LG Electronics 47WS50MS Stereo System User Manual


 
83
ENG
ENGLISH
CONTROLLING THE MULTIPLE PRODUCT
53. On Time(Repeat Mode/ Time) (Command: f d)
1) To set the On Time(Repeat mode/ Time) function.
Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
00: Repeat Off
01: Repeat Once
02. Repeat Daily
03: Repeat from Monday to Friday
04: Repeat from Monday to Saturday
05: Repeat from Saturday to Sunday
06. Repeat on Sunday
07: Repeat on Monday
08: Repeat on Tuesday
09: Repeat on Wednesday
0A: Repeat on Thursday
0B: Repeat on Friday
0C: Repeat on Saturday
Data2
00 to 17: 00 to 23 Hours
Data3
00 to 3B: 00 to 59 Minutes
* Enter “fd [Set ID] ff” for checking On Timer(Repeat
mode/ Time) values.
* Check if Time1 and Time2 have been set before
setting this function.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
2) To check the setting value of the On Time (Repeat
Mode/ Time) function.
Transmission
[f][d][ ][Set ID][ ][Data][ ][f][f][ ][f][f][Cr]
Data1
f`1 ~ f7: From the first to the seventh index no. of the
On Time list
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3]
[Data4][x]
Data1
From the first to the seventh index no. of the On Time
list
Data2
00: Repeat Off
01: Repeat Once
02. Repeat Daily
03: Repeat from Monday to Friday
04: Repeat from Monday to Saturday
05: Repeat from Saturday to Sunday
06. Repeat on Sunday
07: Repeat on Monday
08: Repeat on Tuesday
09: Repeat on Wednesday
0A: Repeat on Thursday
0B: Repeat on Friday
0C: Repeat on Saturday
Data3
00 to 17: 00 to 23 Hours
Data4
00 to 3B: 00 to 59 Minutes
54. On Time Input (Command: f u)
1) To set the On Time Input function.
Transmission
[f][u][ ][Set ID][ ][Data][Cr]
Data
20 : AV
40 : Component
60 : RGB
70 : DVI-D
90 : HDMI
C0 : Display Port
B0 : SuperSign
* Check if Time1 and Time2 and On Time(Repeat
Mode/Time) functions have been set before setting
this function.
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
2) To check the setting value of the On Time Input
function.
Transmission
[f][u][ ][Set ID][ ][Data][ ][f][f][Cr]
Data1
f`1 ~ f7: From the first to the seventh index no. of the
On Time Input list
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data1][Data2]
Data1
f`1 ~ f7: From the first to the seventh index no. of the
On Time Input list
Data2
20 : AV
40 : Component
60 : RGB
70 : DVI-D
90 : HDMI
C0 : Display Port
B0 : SuperSign
55. H Position (Command: f q)
To set the Horizontal position.
* Only available for Tile Off mode.
Transmission
[f][q][ ][Set ID][ ][Data][Cr]
Data
00~64: Left -50 ~ Right 50
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]