Filter
Top Products
D.
UNPACKING AND ASSEMBLY
1. Open the box and remove the top layer ofprotective
foam. The following items will now be visible:
1 SBP-32X processor
1 ACpower cord
1 Packet containing,~the Owners Reference and warranty
card
~i~
Note: If any of these items are not included please con-
tact your authorized dealer immediately for assistance.
Save all packing materials. If you must ship your
SBP-32X in the future rep.ack the unit in its original
packaging to prevent transit damage.
E. BASIC INSTALLATION
AND CONNECTIONS
Before you install the SBP-32X into your system we
recommend following these guidelines in choosing the
location. This will facilitate a clean, trouble-free installa-
tion.
CAUTION: When making connections to this component
or any other, make sure ttie power amplifier is OF1
~
and
the preamplifier is in the MUTE or STANDBY mode.
1. Although well shielded, the processor should not be
placed in close proximity to hum-sensitive components
(i.e. PREAMPS, TURNTABLES, TUNERS, etc.)
2. As with any high quality component, ensure that the
vent openings in the chassis are i~ree from obstruction,
allowing the processor to dissipate heat created by,!ts
highly regulated power supply and high bias class A"
output stage.
3. Run the male end of the AC cord from the processor
location to a nearby wall socket. This will be easier to
accomplish no, w, as the component itself is not in the
way. Do not plug the AC cord into the wall socket at this
time!
dNOTE: While the SBP-32X has superb regulation and
oes not require a dedicated AC circuit, we strongly
advise against any connections through extension cords
or multiple AC adaptors. High quality 15 amp grounded
AC strips are acceptable.
3