Filter
Top Products
Cautions:
a. Do not oil the laser transport! This mechanism is com-
ple.tely self-contained and does not require customer
maintenance.
b. Do not touch any part of the exposed laser and servo ’
system with your hands. This could accidentally damage
tile drive unit ......
2. To remove finger ~arks and small scratches from the
dust cover we recommend a light hand glaze which is
specifically designed for plastics and painted surfaces. At
Krell we use a product from 3M calle~l "Imperial Hand
Glaze". Its part number is 05990. Follow the
manufacturer’s directions.
3. Should deeper scratches need to be removed we rec-
ommend a light or,,medium-duty plastic polis,h such as
"Plastic Polish #2 . Follow the manufacturer s directions
and use the light 3M type glaze to remove any swirl
marks. These cleaning products may be found in quality
automotive body or detailing shops.
I.
QUESTIONS AND ANSWERS
Q. My analog-to-digital processor will accommodate
either fibre optic or coaxial digital inputs. Which output
should I use on the MD-2?
A. While a high quality coaxial willperform quite well,
we recommend glass fibre optic cable due to its ability to
completely isolate the grounding planes between the
transport and processor, and its resistance to RF interfer-
ence.
Q. I have installed the MD-2 but the disc will not turn
when I press PLAY. What should I do?
A. Check to see if you removed the transport screws from
the bottom of the unit as stated in the UNPACKING
AND ASSEMBLY section of this manual.
Caution: Should this not be the cause of your difficulty.
do not attempt any repai.r of this unit. Contact your autho-
rized Krell Dealei/Distributor or the factory.
7