Filter
Top Products
C. UNPACKING AND ASSEMBLY
1. Open the box and remove the top layer of protective
foam. The following items will now be visibIe:
1
Dust Cover encased in a protective sleeve
1 CD Stabilizer
1 AC power cord
1
MD-2 RC Remote Control
3 AAA Batteries for MD-2RC
1 Packet containing the Owners Reference and
N warranty card
ote: If any of these items are not included [?lease
con.tact your authorized dealer immediately for
assistance.
2. Remove the layer of foam containing these items and
set it aside for later use. Carefully remove the MD-2
transport from its box and remove the protective plastic
wrap.
Note: Save all packing materials. If you must ship your
MD-2 in the future repack the unit in its original pa, ckag-
ing to prevent transit damage. If the unit is returnecl to
KRELL for service please send the cover and the remote
control unit.
Caution: If your MD-2 has the custom lucite cover do not
remove it fiom its protective sleeve at this time! This
cover is extremely_ delicate and can be. permanently
scarred if mishandled. Please follow the instructions
provided in this Reference for safe installation.
3. Remove the transport screws from the bottom of the
unit. Their locations are marked with stickers on the
bottom of the chassis.
NOTE: Later pro,duction models have a protective plastic
hub that secures the transport from the top of the unit
during shipping instead ot transport screws. Carefully
remove the-black plastic hub by tu~ing it counterclock-
4, Remove the voltage identification sticker from the
back of the unit. You are now ready to install the dust
cover.
2