Krell Industries MD2 Turntable User Manual


 
G. REMOTE CONTROL
1. The operating functions of the Remote Control are
describei:l below:
PAUSE
STOP
PLAY
Temporarily stops the music at a specific
point; Pr.essing again resumes play from the
same point.
S~tops the disc from playing
:starts the disc playing at track 1; will also
restart play of t-he current track
Reverse track select
Forward track select
Fast reverse scan
Fast forward scan
2. Battery installation:
Remove the two hex hea,d, screws from the bottom por-
tion of the remote control s front plate. Remove the small
top plate to expose the battery storage compartment.
Ref6r to the polarity drawing while inserting the batter-
ies. Replace the top plate and insert the two hex head
screws.
H. CARE AND CLEANING
CAUTION: Please read this section carefully to prevent
damage through improper cleaning methods or materials.
1. Due to the exposed nature of the laser transport assem-
bly on the MD-2extra care should be taken to insure that
it is not accidentally contaminated with finge~rints,
cleaning liquids, etc. During day-to-day use the laser will
not become dirty or contaminated any faster than an
enclosed transport. However, the laser should be cleaned
at least twice annually to remove residue from smoke and
airborne oils.
To clean the laser lens: place a drop 0f CD cleaning fluid
on a clean, lint free cloth and eng_cN~ wipe the lens clean.
6