Filter
Top Products
COMPLETE TRANSPORT FEATURES AND FUNCTIONS
The KPS-20 has a wide variety of transport functions. New capabilities have
been added to standard functions to enhance the use of the KPS-20, Listed below
are the functions which can be accessed from the front panel and remote control.
STOP: Stops the disc while playing. Erases all short term program memory.
Does not erase Disc Management System (DMS) data.
PI~Y: Starts the disc playing from track 1 or from a keypad-selected track.
Begins standard track programming. Pressing the Play button during a track
will start that track again from the beginning.
I<: Track Back. Selects and begins playing the track previous to the current
track. Also scrolls backward through DMS or standard track programming.
> I : Track Forward. Selects and begins playing the track after the current track.
Also scrolls forward through DMS or standard track programming.
I< I<: INDEX Back. Selects the index number previous to the current index
number within a specific track if the CD was recorded with separate indexing.
> I > I : INDEX Forward. Selects the next index number within the current track
if the CD was recorded with separate indexing.
NOTE: Some discs do not have index numbers programmed within tracks. When
the Index buttons are pressed the display will default to the current track
number.
<<: Search Back. Fast scroll backward through program.
NOTE: When operating in Search Back the system searches in 5 second increments.
>>: Search Forward. Fast scroll forward through program.
PAUSE: Temporarily stops play of current track. Does not effect DMS or
standard track programming. Second press of the Pause button resumes play.
REPEAT: (REP and REP 1) When pressed once, repeats the entire disc, DMS
standard track program indefinitely. When pressed twice, will continuously
repeat only the current track. Press Stop or Repeat a third time to cancel this
function. When selecting the Repeat function desired, press the.~Repeat button
once and the LED indicator on the faceplate will illuminate. Press the Repeat
function twice and the REP 1 indicator LED will illuminate, indicating only a
single track will repeat.
8