Filter
Top Products
2. Select the track you want first in the program. You can use the Track
Advance and Reverse buttons to select the track numbers or punch the
number directly into the keypad.
3.
After you select the track, press the Program button again. The track you
selected is now in program memory.
4. Repeat this sequence for each track you want in your program.
EXAMPLE: Here is a sample program sequence
1. Press Program
2. Press 2, then Program
3. Press 4, then Program
4. Press 6, then Program
5. Press 8, then Program
Press Play and the program sequence 2, 4, 6, 8, will begin.
NOTE: While playing the program, the Track Forward, Track Back, Repeat, and
Pause functions work within the program.
To clear the program memory press the STOP button.
DMS
The Disc Management System (DMS) allows a track program you have
written to be saved indefinitely in the KPS-20’s memory.
CAUTION: Please proceed slowly and follow the Sequence carefully while
learning to program DMS. The DMS function will appear to be malfunctioning if
the sequence is changed.
How to Write a DMS Program
1. Press the Program button on the front panel or remote control. The program
LED will be illuminated next to the display. This puts the machine in the
program mode.
2. Follow the standard program instructions as described above.
3. Once the Program is written, press the DMS button on the front panel or
remote control. Press the Program button and the DMS LED on the front
panel will illuminate. The DMS program is now complete.
11