Filter
Top Products
Placement
Before you install the KAV-250cd/2 into your system, review the
following guidelines to choose the location for the KAV-250cd/2. This
will facilitate a clean, trouble-free installation. The KAV-250cd/2 does
not require any type of special rack or cabinet for installation. For the
dimensions of the KAV-250cd/2, see Specifications, on the back
cover.
Place the KAV-250cd/2 on a firm, level surface, away from exces-
sive heat, humidity, or moisture. The KAV-250cd/2 requires at least
two inches (5 cm) of clearance on each side and at least two inches
(5 cm) of clearance above the component to provide adequate venti-
lation. Installations inside cabinetry may need extra ventilation.
Do not place the KAV-250cd/2 near hum sensitive components such
as preamplifier phono stages or tumtables. Although the
KAV-250cd/2 is well shielded, placing it near these components
could create interference and cause hum.
Note The KA V-250cd/2 incorporates an advanced suspension system and does
not require additional mass coupling or isolation. You may experiment with
feet or cones as long as they are not permanently affixed to the unit. Any
unauthorized modifications to the unit or electronics will void the warran~
IMPORTANT Do not attach enhancement accessories such as rings, mats, or
dampers to individual compact discs. These accessories may interfere
with the compact disc transport, resulting in erratic playback and~or
poor sound.
AC Power
Guidelines
The KAV-250cd/2 has superb regulation and does not require a ded-
icated AC circuit. Avoid connections through extension cords or multi-
ple AC adapters. High quality 15 amp grounded AC strips are accept-
able. High quality AC line conditioners or filters may be used if they
are grounded and meet or exceed the unit’s power supply rating of
100 VA.
4 Krell KAV-250cd/2