Filter
Top Products
How to Program
a Track Sequence
This short term programming lets you store a maximum of twenty
tracks in a program sequence.
1. Use the direct number access keypad or the track forward and
back keys to select a track.
2. Press the program key to store the selected track. The front
panel display shows PROGRAM 1 for the programmed track and
the total track length.
3.
Use the direct number access keypad or the track forward and
back keys to select the next track. The front panel display flashes
PROGRAM until you press the program key. The front panel dis-
play shows 2 and the total program time.
4. Repeat this procedure for each of the tracks you wish to store. A
maximum of twenty tracks can be programmed in sequence.
5. Press the play key to begin playback of the tracks in the program
sequence.
Note
Track forward, track back, and repeat function normally within a
programmed sequence.
How to Change
a Programmed
Track Sequence
1. If the compact disc is playing, press the stop key.
2. Press the program key. The front panel display cycles through
the programmed track numbers once.
Note
TO ADD TRACKS
TO THE PROGRAM
You can select a track anytime during the cycle, or after the front panel dis-
play has stopped cycling.
To add or delete tracks, first follow steps one and two, above. Next,
follow the steps below to add or delete tracks:
Press the track number you wish to add on the direct track access
keypad, then press the program key. The newly programmed track is
placed at the end of the existing track sequence.
TO DELETE TRACKS
FROM THE PROGRAM
Press the track number you wish to delete on the direct track
access keypad. The front panel display shows the track number,
P and flashes PROGRAM.
2o Press the program key to delete the selected track number.
16 Krell KAV-250cd/2