Filter
Top Products
Back Panel Description
See Figure 2 on page 8
DIGITAL OUTPUTS 13 Optics Digital Output
The KAV-250cd/2 is equipped with an EIAJ fiber optic digital output
with a TosLink connector.
14 Coax(ial) Digital Output
The KAV-250cd/2 is equipped with an S/PDIF coaxial digital output
with an RCA connector.
ANALOG OUTPUTS
15 Left and Right Balanced Analog Outputs
The KAV-250cd/2 is equipped with one pair of balanced analog out-
puts with XLR connectors.
16 Left and Right Single-Ended Analog Outputs
The KAV-250cd/2 is equipped with one pair~of single-ended analog
outputs with RCA connectors.
REMOTE
CONNECTIONS
17 RC-5 In
The KAV-250cd/2 is equipped with an RC-5 input that makes cus-
tom installation easy and secure by accepting baseband RC-5 input
commands from hardwired remote controllers.
18 12 VDC Out
The KAV-250cd/2 is equipped with an output that sends 12 VDC
(12 V tdgger) power on/off signals to other Krell components and
other devices that incorporate a 12 V trigger. This allows you to turn
other components on or off, or to and from stand-by, from the
KAV-250cd/2. When the KAV-250cd/2 is switched between stand-by
and operate, it sends a signal from the 12 VDC Out that will switch
other components, allowing whole systems or parts of systems to be
easily coordinated.
19 12 VDC In
The KAV-250cd/2 is equipped with an input that receives 12 VDC
(12 V trigger) power on/off signals from other Krell components and
other devices that incorporate a 12V trigger. This allows you to turn
the KAV-250cd/2 on or off, or to and from stand-by, from other com-
ponents.
Notes
The 12 VDC ou~ut power is limited to 30 ma.
Consult the owner’s reference of the components used in a custom installation
to take full advantage of the remote capability of the KAV-250cd/2.
Krell KAV-250cd/2 9