Filter
Top Products
12
GENERAL OPERATION
Removing a Disc
When the disc stops playing, Slide the
OPEN switch on the DVD unit to open
the disc cover, then you can remove the
disc.
BASIC PLAY
Stopping Playback
- Press STOP button on the DVD unit or
button on the remote control one time
to pre-stop the unit playback. When
button on the front panel or button
on the remote control is pressed, normal
playback will continue.
- Press
button twice to stop the
playback and go back to the DVD
LOGO.
Pausing Play
Pressing
on the remote control or
pressing
on the DVD unit during
playback will stop playback temporarily.
To return to normal playback, press
again.
RAPID FORWARD/RAPID REVERSE
Press & during playback.
Each time the button is pressed, the
speed of rapid forward/reverse changes
according to the disc as follows.
DVD:
VCD/CD/MP3:
Normal Playback X2 X4 X16 X100
Normal Playback X2 X4 X8
TURNING THE UNIT ON/OFF
Turning on the Player
After all connections are completed
correctly, slide the switch on the side of
the DVD unit to open the monitor. Slide
the POWER switch on the side of the
DVD unit from OFF to ON to turn on the
unit. The power indicator PWR on the
DVD unit will turn green. When the unit
is on, it will search the disc automatically.
If there is a disc in the disc slot, the unit
will start playback automatically.
Turning off the Player
When the power is on, slide the POWER
switch on the side of the DVD unit to OFF
to turn off the power and the power
indicator will turn off.
Note:
The unit has screen saver function (select
“ON” in Screen Saver setup). If the
playback is stopped and there is not any
button operation for 5 minutes, it will
activate the screen saver function
automatically; when any button for DVD
function is pressed, the screen saver
function will release automatically.
When the unit is working, turn the
monitor downward and push the montior
back into the monitor base unit until the
screen engages with the switch on the
DVD unit. Then there is no sound from
the speakers but the earphone has
sound output.
Remote Sensor
To control functions using the remote
control point the control at the remote
sensor on the DVD unit.
Loading a Disc
When the monitor is turned upward and
the
unit is on. Slide the OPEN switch on
DVD unit to open the disc cover. With
the printed side facing up, align the
center of the disc with the center of the
disc guide. Press gently down on the
DVD to snap the disc into place. Close
the disc cover, then the player will start
play automatically.
Power Switch
Monitor
Cover
Disc
Open Switch