Filter
Top Products
Korg iS40 Guide
10
1. Press START/STOP. The demos will playback one after the other.
2. Press START/STOP to stop the demos.
To listen to a single demo song:
1. Select the desired demo song by pressing the ARRANGEMENT NUMBER or
PROGRAM NUMBER buttons.
2. Press START/STOP to stop the demo song.
3. Press EXIT/NO or one of the MODE buttons to exit from Demo mode. (see manual
page 20 for a listing of the individual demo songs)
About the Accessory Disk
The disk that comes with the iS40 contains all of the Factory preset data, as well as
additional files, including demonstration Backing Sequence and Standard MIDI file data.
iS40’s ability to play songs direct from disk, as well as playing the Backing Sequence
demo. Make sure to backup a copy of the Accessory Disk to a computer, and/or make a
disk copy of the Factory data for backup. (See manual page 21 for information on
how to load / play demo data from the Accessory Disk)
About the JukeBox function:
The JukeBox function allows you to create a list of songs to be played back with just one
command. Various songs on disk can be accessed for playback in any order you wish.
(more on this later in the tutorial)
Loading the Factory Data
1. Power-OFF, then Power-ON the iS40.
2. Press the DISK/GLOBAL button. “LOAD” will be flashing in the display.
3. Press the ENTER/YES button. “ALL” will be flashing in the display.
4. Press the ENTER/YES button again. “ALL” will again appear and flash in the
display.
5. Press the ENTER/YES button again. “FACTORY” will flash in the display.