Filter
Top Products
Korg iS40 Guide
21
Warp-Speed Tour of an Arrangement
Now that you’re getting to be an “expert” on the iS40, let’s work with Chord Scanning,
backing tracks, styles, etc., at an accelerated pace, and completely change the way an
arrangement can work:
1. Select Arrangement “A52 Underground”.
2. SYNCHRO START the arrangement.
3. Mute the accompaniment tracks with the ACC1-3 MUTE button.
4. Raise the DRUMS volume to “118”.
5. Un-mute the ACC1 track by pressing both buttons.
6. Un-mute the ACC2 track as well.
7. Press FILL1, then press VARIATION 4.
8. Mute the BASS track.
9. Press the LOWER button in the CHORD SCANNING section to turn it OFF.
10. Press the UPPER button in the CHORD SCANNING section to turn it ON. Then play
chords in the upper section of the keyboard to activate scanning.
* Keep that arrangement playin’! You’re a Dancin’ Fool !!!!!!!!!!!!!!!!!!!
11. Press the LOWER button in the KEYBOARD ASSIGN section.
12. Play notes in the lower range of the keyboard, to hear the lower split sound.
13. Press the LOW/UPP2 button in the VOLUME section. Check the Display to verify that
you are on “LOW: E64 Dark Pad”.
14. Using the PROGRAM BANK and NUMBER buttons, select Program “C57 Dance
Bass”.
15. Transpose this Program down 2 octaves, then play a bass line in the lower range of
the keyboard.
16. Press FILL2, then press VARIATION 2, and keep playin that PHAT bass line!