Filter
Top Products
Korg iS40 Guide
9
the functions you would expect to find in a sophisticated sequencer! You can then save
your sequences in Standard MIDI file format.
Disk/Global Mode
In Disk mode, you can save and load data via the internal DOS-compatible drive. When
you press the DISK/GLOBAL button, the display will indicate the pages within this mode,
and you can press the PAGE+/- buttons to move through the pages. The Global pages
access tuning, MIDI and HOST port parameters, pedal and external controller (EC5)
settings, Lower Memory, Velocity curves, as well as Chord Recognition, Auto Scan,
Scales, and MIDI dump procedures. Joystick settings for pitch control of Upper1 and 2
sounds, WRITE GLOBAL, and Calibration procedures are also part of the Global mode
pages.
Display Pages
Each of the parameters and functions of the various modes are grouped into pages and
sub-pages in the display. The current page number is always in the right-hand side of
the display. Use the PAGE+/- buttons to scroll through pages, and the CURSOR <> and
ENTER/YES buttons to go to any associated sub pages.
Pro-User Tip:
You can direct-select specific pages by holding down a MODE button, followed by
pressing one of the Arrangement or Program number buttons. For instance, pressing
the ARRANGEMENT button, then pressing ARRANGEMENT NUMBER button 8 will take
you to page 8 of Arrangement Play mode. Pressing PROGRAM NUMBER 1 will take you
to page 9 of Arrangement Play mode. You can also re-configure these direct access
pages so that the same type of page is accessed from the same button. (see manual
page 19)
Listening to the Demo Songs
There are 16 ROM demos in the iS40. Here’s how to access them:
1. Press the ARR.PLAY and B.SEQ (DEMO) buttons together. The “Demo” page will
appear in the display.
To listen to all the demo songs: