Filter
Top Products
Korg iS40 Guide
17
4. Press and Hold the SPLIT POINT button, located to the left of the display in the
MODE section. Look in the Display as you do this, and in the upper-right area, you’ll
see “SPLIT” and “C4” below it. This is the current split point for Arrangement B66.
5. While Holding the SPLIT POINT button, press any key on the keyboard, and the
Display will indicate the new selected split point. Release the SPLIT POINT button
and play the keyboard to hear the new split.
6. Re-select Arrangement B66 again, to recall the original setup.
7. Start the arrangement by pressing START/STOP.
8. Press the LOWER button in the KEYBOARD ASSIGN section, and then play chords
in the lower range. You’ll hear the “Lite Voices” program assigned to the lower split
point. Play in the upper range to hear the “Dist Lead” sound.
Or:
Changing the Split Point:
1. Select Arrangement “A75 By on”. Again note that the UPPER1 button is lit. Also note
that the SPLIT button is lit in the KEYBOARD MODE section, located above the
PROGRAM section.
2. Without starting the arrangement, simply play notes in the lower and upper ranges
of the keyboard.
3. Press and Hold the SPLIT POINT button, located to the left of the display in the
MODE section. Look in the Display as you do this, and in the upper-right area, you’ll
see “SPLIT” and “C4” below it. This is the current split point for Arrangement A75.
4. While Holding the SPLIT POINT button, press any key on the keyboard, and the
Display will indicate the new selected split point. Release the SPLIT POINT button
and play the keyboard to hear the new split.