Filter
Top Products
5
333mm
53mm
89mm
Line Inputs Controlled Outputs
Direct, non-balanced RCA The line level controlled outputs
inputs. We do not suggest the same content as the
connecting a line input and a amplified outputs but at lower
balanced input(BIB) on the level that can feed larger and/or
same input. It is acceptable to multiple amplifiers. They can
have (for example) a direct be connected to subwoofers
input on 1 and 2 and balanced too!
inputs on 3 and 4.
Amplifier Outputs Balanced Zone Inputs
The Q450rs is rated at 25 watts This feature is unique to the
RMS per channel (50 watts Q450rs. It allows the user to
per zone). connect a local source in a
distant room.
This is a lot of power to drive
even the most demanding By being balanced, the signal
speakers. quality is perfectly transmitted
without any unwanted added
hum or noise.
Note: It is perfectly acceptable to have more
than one pair of speakers per zone. Make sure
the series or parallel impedance is between
4-16 ohms.
Note: Each zone is effectively an integrated stereo
amplifier. You can use the internal stereo amplifiers
and/or connect the Q450rs to larger amplifiers to
increase power output or to scale up the zone to
larger sub-zones. Each zone functions identically;
respective to its address.
Power Indicator Power Jack
24 VDC
Center pin positive
GETTING TO KNOW THE Q450rs
RS232 Connector
Note: The source inputs are shared throughout so
any or all zones can play the same program material
(or obviously some other input source).