Filter
Top Products
3
SS Component Systems
Features
• 3 Position Tweeter Attenuator Select
from 0 dB, +1.5 dB or + 3.0 dB tweeter
output level for level matching the tweeter
to the midrange due to personal taste or
mounting locations.
• Zobel Impedance Compensation
Provides more linear response across the
operating range and prevents crossover
point shift by correcting impedance rise.
TWEETER
• DuPont® Tetoron® (Soft Dome) 30mm
Diameter Tweeter Used to provide ultra-
wide frequency response. Excellent
balance between high and low end
frequency response.
• Ferro-Fluid™ Cooled Voice Coil
Enhances the thermal transfer from voice
coil to the motor structure for higher power
handling and decreased power
compression.
• Dual Neo Magnets In Tweeter Top and
bottom magnets provide a reduction in
overall tweeter size while increasing BL
22% over conventional designs. (Patent
Pending)
• Vented Inner Motor System The
chamber under the tweeter dome is vented
to the perimeter of the voice coil with
machined channels in the motor structure
to minimize dome distortion.
Features
A Brief Plug For The SS Systems
And Our Technical Manuals At
www.KICKER.com
The SS Component Speaker Systems are
absolutely the best sounding full-range
speakers to ever leave the KICKER Livin’
Loud Labs. We dare to say (and we tested
quite a few) they are the best sounding
speakers on the market today...period!
There are many state-of-the-art features in
these systems and they are briefly
described in the following Features
section. If you find yourself awake in the
middle of the night with the crave for White
Castles and a thirst for more in-depth
detail on the SS Components then hit our
website and download the Technical
Manual for the SS Component
Systems.(Hit your local White Castle for
the sliders)
CROSSOVER
• System Optimized Two-Way
Asymmetrical Passive Crossover
Network Provides 24 dB High Pass and
12 dB Low Pass at 2.8Khz for seamless
transition from midrange to tweeter.
• Air Core Inductors Provides higher
power handling with less ‘signal smear’
and magnetic saturation when compared
to other ‘core’ type inductors.
• Mylar Film Filter Capacitors Used in
tweeter crossover section for smooth and
extended high frequency response.