Filter
Top Products
17
SS Component Systems
Installation
Crossover Mounting
When choosing a location for your
crossover keep in mind you will need
access to it so you can connect your
wiring and adjust the tweeter
attenuator. Also, DO NOT place the
crossover in any location where it will get
wet or be in standing water. This will
damage the unit!
The bottom of the car door is not a
good location. If you must mount the
crossover in the car door, exercise
caution as water can accumulate in the
bottom of the car door. Keep the
crossover high in the door and shielded
from water.
C
a
r
D
o
o
r
C
a
r
D
o
o
r
Once you have selected a mounting location, remove the crossover’s top by pulling it
straight off the crossover. It is held in place with 3 clips at the indicated locations.
Using the supplied screws and hardware (or other method if required) mount the
crossover.
Place the crossover top back on the crossover and press into place.
Clip
YES
NO!