Filter
Top Products
11
SS Component Systems
Installation
COAXIAL MOUNT WITH GRILL
Prepare The Midrange
Remove any posts or
plugs in the Midrange. It
should look like the pic
shown here.
Next you will need to
remove the Driver Boot
from the back of the
Midrange. It is a friction
fit, simply pull it straight
off the back.
Prepare The Tweeter
You will need to have the Tweeter,
Tweeter Mounting Post and Tweeter Grill
Mount Ring (Blue).
Insert the Tweeter into Tweeter Mounting
Post and tighten by turning clock-wise.
Save the Tweeter
Grill Mount Ring for
use later. It is used
to attach the Grill.
You should now have
a tweeter assembly that
looks like this to insert
into your Midrange.
Insert the tweeter
assembly into the
midrange while feeding
the wire through the
Midrange’s motor as
pictured. Tighten by
turning clock-wise.
Lay the tweeter wire
in the machined
groove on the motor
back plate and press
Midrange Driver Boot
into place. Several
inches of the tweeter
wire will be exposed
to permit wring.
After mounting the
assembly to your
panel, place the grill
on the Midrange and
secure with the Blue
Grill Mount Nut.
Repeat this process for the second
Tweeter and Midrange.