Filter
Top Products
When selecting a location to mount your Kicker
amplifier be sure it is structurally sound and that
there are no items behind the area that could be
damaged by the screws. Check for wiring, brake
lines, fuel lines, gas tanks, etc.
All amplifiers generate heat under normal opera-
tion. Be sure to choose a location that allows ade-
quate ventilation for the amplifier. Also consider that
the air temperature inside an automobile’s trunk can
reach upwards of 140 degrees fahrenheit. An ampli-
fier mounted here may require additional cooling
needs such as fans or venting to allow cool opera-
tion. If possible, mounting the amp in the passenger
compartment will allow cooler operation.
Remember that the controls of the amp will need
to be accessible for adjustment later. Keep this in
mind as you choose your amplifier’s mounting loca-
tion.
Now that you are ready to mount your amplifier, use the supplied 3mm allen wrench to remove the amplifier
shroud. This will give you access to the mounting holes in the amplifier and all wiring connections.
Mounting Instructions
Remove
Remove
Remove
Remove
With the shroud removed, you now have access to the four mounting holes in the mounting feet and all wiring
connections. Drill 4 holes using a 7/64” drill bit and use the supplied #8 screws to mount the amplifier.
KX100.2 & KX200.4 Technical Manual
Version 2.0
Page 4