Filter
Top Products
+
-
+
-
GROUND
REMOTE
TURN-ON
BATTERY
+12V
FUSE
18"
or less
If AMP 1 or AMP 2 are used to drive subwoofers, set the switch to LO PASS.
This will allow only low frequencies to pass through the amplifier
to the woofers.
MAKE SURE:
* The LEFT input must be split up and fed to the L & R Amp 1 inputs with
a Y-Adapter.
* The RIGHT input must be split up and fed to the L & R AMP 2 inputs with
a Y-Adapter.
SIGNAL IN AMP 1
SIGNAL IN AMP 2
To Right Speaker
To Left Speaker
-
-
KX200.4 2 Channel
Mono Mode
System Diagrams
KX100.2 & KX200.4 Technical Manual
Version 2.0
Page 16