Filter
Top Products
Custom tooled gold plated connectors Assure maximum power transfer and damping.
SAMS (Stereo And Mono Simultaneously) Amplifier will operate into a bridged mono load and a stereo load at the
same time. This type of system is great if the consumer is just starting out, or on a tight budget.
Three Year Warranty When you’re ‘Livin’ Loud’ you want the tunes to roll non-stop and we couldn’t agree
more. When you purchase your KX Amplifier from an authorized KICKER dealer we back it up with a full year war-
ranty...parts and labor. If you have an authorized KICKER dealer install it for you at the time of purchase we push
that warranty out to a full THREE years! We build our products to give you years of trouble free performance and
know that if it is installed right the first time you will get just that...so we back it up!
KX100.2 & KX200.4 Technical Manual
Version 2.0
Page 3
Features cont.
Model KX100.2 KX200.4
RMS Power
In Watts, All Channels Driven
@ 14.4V, 4W Stereo, <
1% THD 2 x 35 4 x 35
@ 2W Stereo, <
1% THD 2 x 50 4 x 50
@ 4W Mono, <
1% THD 1 x 100 2 x 100
@ 12.5V, 4W Stereo, 0.085% THD 2 x 25 4 x 25
@ 2W Stereo, 0.5% THD 2 x 40 4 x 40
@ 4W Mono, 0.5% THD 1 x 80 2 x 80
Length with Shroud 8.84” 11.84”
(22.45cm) (30.07cm)
Specifications common to all models:
Height: 2.5 inches / 6.35 centimeters
Width: 10.125 inches / 25.7 centimeters
Frequency Response: 20 Hz - 20 KHz, + 0, -1dB
Input Sensitivity: 170 mV - 5 V low level, 340 mV - 10 V high level
Signal-to-Noise Ratio: >95 dB, a-weighted, re: rated power
Electronic Crossover: Fixed high or low pass at 80Hz, 12 dB/octave
KickBass Boost: Variable 0 to +12 dB boost @ 40 Hz
Specifications