Filter
Top Products
GROUND
REMOTE
TURN-ON
BATTERY
+12V
FUSE
RIGHT SPEAKER(S)
LEFT SPEAKER(S)
+
_
+
_
18"
or less
+
_
MONO
SPEAKER
HIGH PASS
CROSSOVER
LOW
PASS
CROSS-
OVER
HIGH PASS
CROSSOVER
4 Ω
Min.
2 Ω
Min.
2Ω
Min.
SIGNAL IN
When the amplifier is driving speakers in the configuration above,
the crossover switch should be set to the OFF position. This will
allow the speakers to play full range. The speakers will need
passive crossovers in order to function properly. In the simpliest
form, the subwoofer will need a coil and the high and midrange
speakers will need a capacitor. These components will allow the
speakers to play in a dedicated frequency range for the best
sound quality.
To Woofer
To Left Speaker
-
-
To Right Speaker
-
KX100.2 SAMS Mode
System Diagrams
KX100.2 & KX200.4 Technical Manual
Version 2.0
Page 13