Filter
Top Products
XD-9581MD (En)
52
Preparation sectionBasic sectionApplication sectionKnowledge sections
Convenient recording methods
Change of the track sequence according to the tape length
(CD =TAPE only)
(Time edit recording )
By specifying the recording time of the tape used, CD tracks can be recorded with their order automatically changed so that
no tune is interrupted at the end of tape sides A and B.
Please read “Let's record” in the operation manual of the cassette deck X-H9 (option) carefully.
Recording preparation is required. y
Start edit recording.
Make sure that the “PGM” indicator is off.
3
4
Press the numeric keys as shown below....
30-minute tape (C-30):000)
46-minute tape (C-46):00006
Enter the disc and tape conditions.
÷The recording time can be set up to a maximum of 99 minutes.
÷Up to 32 tracks can be edited.
÷CD tracks will be edited automatically onto tape sides A and B.
After editing, the “EDIT” indicator stops blinking and starts to
light steadily.
1
Depending on the combination of conditions from CD contents (number of titles and length of the titles) and tape recording time, interruption
of a title may not be avoidable. In such a case, the respective title will not be recorded.
1Select the disc.
2Press the EDIT key.
Light the “EDIT” indicator.
2
Goes off
÷The recording level will be adjusted automatically in approx. 60
seconds (variable depending on CD contents), after which
recording starts.
÷The tape and CD stop automatically when recording has com-
pleted.
Editing is cancelled in case of waiting for 8
sec. or more.
Selection of 46, 54, 60, or 90 min tape can be done easily by
pressing the TIME/ENTER key (CD) of the remote control
repeatedly. After entry, press the EDIT key then proceed to
step 4.
Note
Note
3Enter the recording length of the tape.
“PGM”, “EDIT”, and “SPACE” are lit.
Go to step 3 within 8 seconds.
Go to step 2 within 8 seconds.
1Select “CD” with the input selection
key.
2Make sure that the “PGM” indicator
is off.
SPACETOTAL
MUTE
12
PROG.
N.B.
MEMO
EDIT RDSEON TANEWS INFO. TP PTY
AUTO
TUNED
DISC ALL
STEREO
kHz
MHz
MAX
SLEEP O.T.T. ECHO P.B.C.
MANU.
12
13
14
15
16
17
18
19
20
VOL.
MUSIC CALENDAR
D1 )1
@
)):)
1
2
3
4
5
6
7
8
9
10
EQ.
ON
11
PGM
kHz
MHz
17
18
19
16
12
13
14
15
20
MUTE
12
PROG.
N.B.
SLEEP O.T.T.
MANU.
ECHO P.B.C.
MAX
MEMO
AUTO
TUNED
DISC ALL
STEREO
RDSEON TANEWS INFO. TP PTY TOTAL
EQ.
ON
VOL.
MUSIC CALENDAR
D_ DIsC
1
2
3
4
5
6
7
8
9
10
11
PGM EDIT SPACE
5
6
7
8
1
2
3
17
18
19
16
12
13
14
15
20
9
10
11
kHz
MHz
MUTE
12
PROG.
N.B.
SLEEP O.T.T.
MANU.
ECHO P.B.C.
MAX
MEMO
AUTO
TUNED
DISC ALL
STEREO
RDSEON TANEWS INFO. TP PTY TOTAL
EQ.
ON
VOL.
MUSIC CALENDAR
CD A FILE
4
PGM EDIT SPACE
CCRS
0
+10
7
8
9
4
5
6
1
2
3
PTY
SEARCH
EDIT
DISC SKIP
EDIT
P. MODE
Character information display cannot be displayed while the
spectrum analyzer display mode is used. Switch to the super-
posed display or character display mode to see the information.
!Ø
Wait until the “EDIT” indicator stops
blinking, and then press the CCRS key.